After operation

  1. Release the trigger.
  2. Lock the safety lock under the trigger.
  3. Switch the device off.
  4. Pull the power plug out of the socket.
  5. Wind the power cable.
  6. Place the power cable on the bracket.
  7. Close and disconnect the water supply.
  8. Unlock the safety lock under the trigger.
  9. Hold the jet gun with both hands.
  10. Squeeze the trigger to drain the jet gun.
  11. Disconnect the high-pressure hose from the jet gun by pressing the button.
  12. Drain the high-pressure hose for at least 1 minute.
  13. Roll the high-pressure hose back onto the reel.
  14. Remove the extension lance (Figure 1, pos. 2) from the jet gun by rotating it 90°.
  15. Remove the nozzle or floor cleaner (Figure 1, pos. 1) by pressing the release button (Figure 1, pos. 2) on the jet gun.
  16. Place all the accessories on the designated brackets of the device (Figure 2).
Figure 1.