Weekly timer setting

  1. Press and hold the WEEK button until ‘01’ or ‘][‘ starts to blink on the screen.
  2. Use the plus and minus buttons to choose the desired setting:
    • 01 – one-off setting (must fall in the current week).
    • ][ – every week setting.
  3. Confirm with the SET button.
  4. Use the plus and minus buttons to choose the desired anticipation setting:
    • ON – the heater will anticipate the temperature 20 minutes before it is set. If it needs tobe heated, the heater will heat with high capacity in order to heat the room to thedesired temperature by the activation time.
    • OFF – the heater will not anticipate the temperature and will turn on at the set time*.
  5. Confirm with the SET button, 01 SET ON appears on the screen.
  6. Use the plus and minus buttons to select:
    • the desired day (from 1 (Monday) to 7 (Sunday), confirm with the SET button.
  7. Use the plus and minus button to select the desired mode:'
    • Room mode (AA), confirm with the SET button;
    • Towel mode (T), confirm with the SET button.
  8. Use the plus and minus buttons to select the desired temperature:
    • Room mode: 0 – 37°C, confirm with the SET button;
    • Towel mode: 40 – 70°C, confirm with the SET button.
  9. SET ON will appear on the screen.
  10. Use the plus and minus buttons to indicate the activation time:
    • the desired hours, confirm with the SET button;
    • the desired minutes, confirm with the SET button.
  11. 01 SET OFF will appear on the screen; repeat step 10 to indicate the deactivation time.
  12. 02 appears on the screen, there are two options:
    • Set the next activation and deactivation times, repeat step 10 and 11 for every desiredtime. Make sure the timer settings do not contradict each other: maximum 28 per week,maximum 4 per day.
    • If you are done setting the activation and deactivation times, wait until the screenreturns to standard settings.