The minimum diameter of the water connection (hose) is 12.7 mm (1/2”).
The water supply must
supply at least the water consumption of the device (336 l/h)!
The pump must always be supplied with sufficient water. ’Dry operation’ causes
damage.
The water temperature may not exceed 40 °C.
Only use clean water with this device. Impurities or aggressive chemicals damage the
device!
The voltage and frequency stated on the device must correspond to those of the socket. The
electrical system must be approved (IEC 60364-1) and secured with an earth leak switch (max.
30 mA). Never make any changes to the plug or socket in order to adjust them! Defectiveness
in the electric connection could result in a shock!
Damaged components (including plug, electric cable, hose and jet gun) must be replaced
immediately by a technician trained for that purpose or a qualified electrician. Be sure to
use only original parts; hoses and connections are also important for safety. Never carry
out repairs by yourself.
Never make any changes to the device, nozzle(s) or any other parts.
Never cover the device, nozzle(s) or any other parts when using the device.