Mandatory warnings

Please read and understand these safety instructions. Incorrect use can cause injury and will void EUROM’s warranty.

The machine is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
Children should be supervised so that they not to play with the appliance.
Keep all packaging materials, especially foil (danger of suffocation), out of reach of children.
Instructions for appliances connected to the water mains: Max. inlet water pressure 7 bar or 0,7 MPa.
Never touch the plug or the socket with wet hands.
This machine has been designed for use with the cleaning agent supplied or recommended by the manufacturer. The use of other cleaning agents or chemicals may adversely affect the safety of the machine. Keep the cleaning agents out of reach of children.
High pressures jets can be dangerous if subject to misuse. The jet must not be directed at persons, live electrical equipment or the machine itself.
During use of high-pressure cleaners, aerosols may be formed. Inhalation of aerosols can be hazardous to health.
Do not use the machine within range of persons unless the wear protective clothing.
Do not direct the jet against yourself or others in order to clean clothes or footwear.
All current-conductive objects in the work area must be protected against water jets.
Risk of explosion - Do not jet flammable liquids and in circumstances that have risk of explosion.
Never suck up fluids that contain solvents or undiluted acids or solvents. This includes (for example) petrol, paint thinner or fuel oil. The jet mist is very lightly flammable, explosive and toxic. Do not use acetone, undiluted acids and solvents; these harm the materials used in the machine.
High pressure cleaners shall not be used by children or untrained personnel.
High pressure hoses, fittings and couplings are important for the safety of the machine. Use only hoses, fittings and couplings recommended by the manufacturer.
To ensure machine safety, use only original spare parts from the manufacturer or approved by the manufacturer.
Water that has flowed through backflow preventers is considered to be non-potable.
The machine has to be disconnected from its power source during cleaning or maintenance and when replacing parts or converting the machine to another function always remove the plug from the socket-outlet.
Do not use the machine if a supply cord or important parts of the machine are damaged, e.g. safety devices, high pressure hoses, trigger gun.
Inadequate extension cords can be dangerous. If an extensions cord is used, it shall be suitable for outdoor use, and the connection has to be kept dry and off the ground. It is recommended that this is accomplished by means of a cord reel which keeps the socket at least 60 mm above the ground.
Make sure that the line cord and the extension cord are not damaged by stepping on them, squeezing, dragging or something similar. Protect the line cord against heat, oil or sharp edges.
Always switch off the mains disconnection switch when leaving the machine unattended.
Depending on the application, shielded nozzles can be used for high pressure cleaning, which will reduce the emission of hydrous aerosols dramatically. However, not all applications allow the use of such a device. If shielded nozzles are not applicable for the protection against aerosols, a respiratory mask of class FFP 2 of equivalent may be needed, depending on the cleaning environment.