Use the device only for home use, such as cleaning cars, boats, terraces, walls, garden
equipment, etc.
Check the device before each time you use it (including cable, plug, hose and jet gun) for
any visible damage. Check especially the electric cable for faults or cracks. Do not use a
damaged device or one that has not functioned properly when you used last. Give it to your
supplier for repair or replacement.
When using the device, unroll the cable entirely to prevent overheating. If an extension
cable is unavoidable, use a cable of adequate thickness: 3x2.5mm². Inadequate extension
cables can be dangerous! The female plug must be waterproof and the connection must be kept
dry. Faulty extension cables are dangerous!
Vehicle tyres and/or tyre valves can get damaged by high-pressure jets and can spring out.
The initial sign of this is discolouring of the tyre. Damaged vehicle tyres/tyre valves
involve risk of life. When cleaning, observe a minimum jet distance of 30cm.
In case of long breaks, switch off the device using the main switch or pull out the plug
from the socket.
Do not use the device in temperatures under 0°C.
It is forbidden to use the device in areas or under circumstances that have risk of
explosion.
In case of accidents or electricity failure, switch off the device immediately.
Use only clean water. If you use water that contains for example sand (from a well or
something similar), you have to install an extra filter.
In compliance with valid regulations, the device may not be connected to the drinking
water network without a non-return valve. Make sure that your household water system to
which the high-pressure cleaner is connected is equipped with a non-return valve.
Take the device’s weight into account when selecting its storage location and during
transport in order to prevent accidents and injuries.
Release the residual pressure by squeezing the trigger a bit before you disconnect the
hose from the product.
Before each time you use the device and at regular intervals, check whether all the metal
fasteners are sitting well and whether the components of the product are in good condition;
inspect for broken or worn-out parts.
