Wall Designheat 2000R
The Eurom Wall Designheat 2000R is a 2000 Watt wall heater. It has a ceramic element, and therefore heats up energy-efficiently without getting too hot. The cold air fan ensures that the heat is well distributed throughout the room. In addition, this heater has a thermostat. This makes it easy to achieve the desired temperature.
Lees meerThe operation of this heater is also easy. Use the remote control or set the timer in advance. That way you don’t have to worry about it anymore!
- Remote control
- With timer
- Oscillating flap
Specifications
Properties | |
---|---|
Control | control panel, remote control |
Range (max.) | 75 m³ |
Details | open window detection system |
Suitable for space | other, living room, kitchen, bedroom, study/office, office |
Mounting | wall |
Aftercooling | yes |
Overheat protection | yes |
Thermostat | yes |
Timer | weektimer, 0 – 12 hours |
Oscillating | yes |
Material | |
Element | PTC |
Colour | white |
Encasing | plastic |
Technical specifications | |
Powered by | electric |
Connection voltage | 230/50 V/Hz |
Power | 2000 W |
Power selection | 3 |
Dimensions and weight | |
De afmetingen zijn weergegeven in l x b x h. De lengte is van het voorste naar het achterste punt van het product, de breedte is van het meest linkse naar meest rechtse punt, en de hoogte is van het laagste naar het hoogste punt gemeten. Dimensions | 11,5 x 56,5 x 19,5 cm |
Electrical cable | 160 cm |
Weight | 2,4 kg | General |
Product number | 342192 |
EAN | 8713415342192 |
Warranty | 3 year |
Frequently asked questions
The heater remembers the set temperature only when it is on or goes into standby mode. If the device is switched off with the main switch, the heater will return to the default value when switching it on again.
If the plug has been unplugged, you may not be able to pair the Smart App. In that case, reset the heater and pair the Smart App when the wifi symbol on the heater flashes rapidly again.
When the Wifi is connected, the symbol on the display will light up constantly. Don’t want to connect to the Wifi but also no blinking symbol? Press and hold the OFF button until you hear a long beep, then the Wifi is switched off.
Want to turn the Wi-Fi back on? Then press and hold the OFF button until you hear a short beep.
Questions
Have you checked all the information and the frequently asked questions, and you still have questions? Please contact us!
Previous product Next productWhere to buy
Want to know where you can buy this product? Check the online or offline sales points near you!
Downloads
Download the latest manual for this product, or check the instruction video (when available).