Sani 600 Mirror Wifi
The Eurom Sani 600 Mirror Wifi is the perfect addition to your bathroom. Not only is this a nice infrared heating panel, it is also a mirror. Because the heating is in the mirror, your mirror does not fog up, and because the Sani 600 Mirror has a capacity of 600 Watts, your bathroom will also be wonderfully warm.Lees meer
Using the Sani 600 Mirror Wifi is easy. You can easily set the temperature with the control panel in the mirror. Would you rather not switch the panel on and off every time? Then set the handy weekly timer via the app.
- No fogged mirror
- Heat in the right place
- Disappearing display
- Sani 400 WiFi
- Sani 400 WiFi Black
- Sani 600 Wifi
- Sani 600 Wifi Black
- Sani 800 Wifi
- Sani 800 Wifi Black
- Sani 1000 White
- Sani 1000 Black
- Sani 400 Mirror Wifi
- Sani-Towel 500 White
- Sani-Towel 500 Black
- Sani-Towel 750 White
- Sani-Towel 750 Black
- Sani Bathroom Radiator 400 Wifi White
- Sani Bathroom Radiator 400 Wifi Black
- Sani Bathroom Radiator 600 Wifi White
- Sani Bathroom Radiator 600 Wifi Black
- Sani Bathroom Radiator 800 Wifi White
- Sani Bathroom Radiator 800 Wifi Black
- Sani Bathroom Radiator 1000 Wifi White
- Sani Bathroom Radiator 1000 Wifi Black
control panel, Eurom Smart App
|Suitable for space|
yes, weektimer in App
|Dimensions and weight|
|De afmetingen zijn weergegeven in l x b x h. De lengte is van het voorste naar het achterste punt van het product, de breedte is van het meest linkse naar meest rechtse punt, en de hoogte is van het laagste naar het hoogste punt gemeten. Dimensions|
5 x 80 x 60 cm
Frequently asked questions
When the timer is set to OFF the panel will turn off at that time. If you still want to be able to operate the heating via the display, it is advisable not to set the timer to OFF, but to ON at a low temperature. The heating then goes into standby and does not heat, but can still be operated with the display.
The heater remembers the set temperature only when it is on or goes into standby mode. If the device is switched off with the main switch, the heater will return to the default value when switching it on again.
If the plug has been unplugged, you may not be able to pair the Smart App. In that case, reset the heater and pair the Smart App when the wifi symbol on the heater flashes rapidly again.
When the Wifi is connected, the symbol on the display will light up constantly. Don’t want to connect to the Wifi but also no blinking symbol? Press and hold the OFF button until you hear a long beep, then the Wifi is switched off.
Want to turn the Wi-Fi back on? Then press and hold the OFF button until you hear a short beep.
Have you checked all the information and the frequently asked questions, and you still have questions? Please contact us!Previous product Next product
Where to buy
Want to know where you can buy this product? Check the online or offline sales points near you!