Sani Bathroom Radiator 600 Wifi Black

The Sani Bathroom Radiator 600 Wifi Black is a heater with two different modes. The T-Mode (towel) ensures that the towel you put on the heater can heat up to 70 degrees delicious for colder days. The R-Mode (room) you use to heat the bathroom, this setting can be set up to 37 degrees. The heater can be controlled via the Eurom Smart App with Wifi connection, so you no longer have to enter a cold bathroom in the morning.

Lees meer

Thanks to the built-in timer, you enjoy ultimate convenience.

Adjustable timer
Towel and Room Mode
Controllable via Wifi

Also available in:

Specifications

Properties
Control	control panel, Eurom Smart App
Range (max.)	24 m³
Suitable for space	bathroom
Isolation class	IP24
Mounting	wall
Overheat protection	yes
Thermostat	yes
Timer	yes, 0 – 9 hour
Material
Element	fluid, resistance wire
Colour	black
Encasing	metal
Technical specifications
Powered by	electric
Connection voltage	220-240/50 V/Hz
Power	600 W
Dimensions and weight
De afmetingen zijn weergegeven in l x b x h. De lengte is van het voorste naar het achterste punt van het product, de breedte is van het meest linkse naar meest rechtse punt, en de hoogte is van het laagste naar het hoogste punt gemeten. Dimensions	5,3 x 50 x 90 cm
Electrical cable	135 cm
Weight	8,7 kg
General
Product number	352627
EAN	8713415352627
Warranty	5 year

Frequently asked questions

Can I top up the fluid of this radiator?

The Bathroom radiator does not need to be refilled. It is a closed system that takes into account and rising fluid level when heated up.

Can my heater maintain the set temperature after being switched off?

The heater remembers the set temperature only when it is on or goes into standby mode. If the device is switched off with the main switch, the heater will return to the default value when switching it on again.

I cannot control my heating with the app after the plug has been unplugged. What should I do?

If the plug has been unplugged, you may not be able to pair the Smart App. In that case, reset the heater and pair the Smart App when the wifi symbol on the heater flashes rapidly again.

Can I turn off the flashing Wi-Fi symbol on my heater?

When the Wifi is connected, the symbol on the display will light up constantly. Don’t want to connect to the Wifi but also no blinking symbol? Press and hold the OFF button until you hear a long beep, then the Wifi is switched off.

Want to turn the Wi-Fi back on? Then press and hold the OFF button until you hear a short beep.